Wine Fermentation Tank

Model: JTRHJ

Brand: JHENTEN

Red wine fermentation tank strictly follow the pressure vessel (GB150-2011) and "steel welding atmospheric vessel" (NB/T 47003.1-2009) requirements for the design, manufacture and acceptance..

Detail Description

Red wine fermentation tank strictly follow the pressure vessel (GB150-2011) and "steel welding atmospheric vessel" (NB/T 47003.1-2009) requirements for the design, manufacture and acceptance..

Red wine Fermentation Tank use vertical circular tank body,the top is standard conical head,and top of tank body is equipped with dimple jacket ,can pumped in the cooling medium for circulating cooling; The lower of tank set mesh , filtering effect is better; the bottom is60 ° ~ 90 ° inclination of conical head .It is not only good for wine liquid tobi-directional flow fast fermentation, but also isconducive to discharge yeast and impurity; At the bottom of the tank setmixing slag agitator used in the fermentation process and discharge process.

Tank Optional Configuration

Wine Fermentation Tank optional configuration: thermometer (digital display type or dial), sanitary manhole, in-outlet, sterile sampling valve, drain valve, level gauge, and liquid level self-control system (bearing module, non-contact ultrasonic, static pressure transmitting device), etc., or configured according to customers’ requirements.

Application
? Suitable for wine fermentation .

Feature
? 10m3, 19m3,25m3 variety volume of specifications, it can be designed, customized according to the customers' requirements.
? Jacket can put into chilled water (or cooling water), jacket is use dimple jacket; Jacketed outside covered with insulation layer, insulation material is PU (keep cold).
? Connector use tri-clamp, inner tank use SS304 or SS316L, the inner surface mirror polishing Ra≤0.28μm～0.6μm, outer surface can be polishing, wiredrawing ,sandblasting according to customer's requirement.

Design Parameter

Design pressure	ATM (tank body) 0.4MPa(jacket)
Designtemperature	Normaltemperature (tank body) 0℃～7℃(jacket)

Material

Inner	304、316L
Jacket	304
Insulation	PU（keep cool）
Feet	304

Connection

In-outlet

Tri-clamp,Flange

Surface Finish

Finishtype	Mechanical polishing, electrolyticpolishing, Sand blasting , pickling
Polishingprecision	Inner surface Ra≤0.4μm Outer surface Ra≤0.6μm

Normal Model And MainTechnical Parameters

Parameters		Model	JTRHJ—10	JTRHJ—19	JTRHJ—25
Effectivevolume：m3			10	19	25
Barrel	Diameter：mm		Φ2100	Φ2400	Φ2500
	Height：mm		2438	3657	4876
Bottom conetype			60° cone
Mixing	Motor power：kW		5.5	7.5	7.5
	Mixing work RPM：r/min		60（mixing,slagging integrated type）（Thedesign can be adjusted according to customers’ usage）
Theabove-mentioned data is the standard ,for reference only. it can customizeaccording to customer's requirements.

PrevNO！
NextBiological Fermentation Tank

Online Enquiry

Welcome to send an online inquiry! If you have any suggestions or questions about our products, you can Email us.info@jhenten.com, also feedback through this inquiry; we will reply to you within 24 hours. (Monday to Friday, 9:00-17:30)